• 1
  • 2
产品详细
    分享到:
    点击次数:445  更新时间:2019-03-11   【打印此页】  【关闭
    详细介绍:

    人脸识别摄像头模组 安卓一体机识别摄像头模组 支持WINDS系统以及安卓系统平台 高清 高帧率

    USB  Camera

                

    客户名称Customer Name:/

      

    型   号Model:XHY-C003-0580

    日   期Date:2018-8-23

    确认回签Approved:

    内   容  CONTENT 

    1、 目的             Purpose             

    2、 效力             Effect

    3、 技术参数         Technical parameters

    4、 外观尺寸         Shape and Dimensions

    5、 镜头结构         Lens Construction

    6、 功能检验标准     Function inspection criteria

    7、 外观检验标准     Visual inspection criteria

    8、 可靠性测试       Reliability Test

    9、 包装要求         Packaging requirements

    10、其他             Other

    版本Version编写Compile审核Auditing批准Authorize

    V1.0张金畅张金畅朱中文

    一、目的(Purpose)

    为了全面地描述技术合作中所指的技术规格,通常需要由一整套文件予以表示。作为其中的一部分

    ,本技术规格规定了摄像头模组应达到的特定技术规格,对于该型号货品具有约束力。

    For a comprehensive description of technical cooperation referred to the technical 

    specifications, usually a set of documents required by the express. As one part of the 

    technical specifications of the  provides camera modules should meet the specific 

    technical specifications for the goods model binding.

    二、效力(Efficacity)

    如果本规范与该类货品的通用技术规格书中的规格不一致时,以本规格书中的规定为准。

    If the norms of such goods with a common technical specifications of the specification 

    book is inconsistent to the specifications book shall prevail.

    三、技术参数(Technical parameters)

    项目(Items)参数 (Parameters)

    感光片(SENSOR)IMX179

    感光片尺寸(Lens Size)1/3.2”

    最高有效像素(Most effective pixels)3264H x 2448V

    数据格式 (Data Format) MJPG/YUY2

    像素大小 (Pixel Size)1.4*1.4μm

    宽动态范围(dynamic range)/

    镜头(Lens)视角FOV :D=  74.6°

    光学总长Optical length :4.47

    结构 lens construction:5p

    接口mount :M6.5*P0.25

    对焦focusingAF

    帧  速 (Frame rate) 30fps

    自动控制 (auto control)饱和度(Saturation),对比度(Contrast),锐度(acutance),白平衡 

    (White balance),曝光(exposure)。

    音频(audio)高品质数字MIC,单通道

    供电电压(Voltage)DC 5V

    最大工作电流 (working current)MAX 300mA

    USB接口(USB Connector)USB2.0

    储存温度 (Storage Temperature)-20C to +70C

    工作温度 (working Temperature)随环境温度而变化

    兼容系统 

    (system compatibility)1、Windows XP(SP2,SP3)、Vista 、7、8、10  Android system

    2、Linux or OS with UVC driver 

    四:尺寸外观Appearance Dimension

     

    五:镜头参数Lens Specifications

     

    六、功能检验标准 (Function inspection criteria)

    (一)功能定义:

        1.摄像头模组电气性能、图像质量。(Electrical properties , the quality of image. )

    (二)检验方法:( Inspection methods)

    1. 人员: 外观检查人员需经过培训并且辨色能力正常,其视力应达到1.0以上(矫正后达到1.0以上

    亦可),辨色能力应可通过标准测试。

    Staff: The appearance of the inspectors to be trained and the capacity of normal color 

    vision, Its vision to achieve more than 1.0 (after correction can also be reached more 

    than 1.0), Color vision capability should be available through standard tests.

       2. 工具:连接电脑,用Amcap 测试软件检测图像。

         Tool: Connect the computer, Testing images with Amcap software.

    3. 距离和时间: 观察距离为30  55cm,观察时间为每个面3  5秒。

    Distance and Time: Observation distance: 30  55cm, 

    Observation time for each surface: 3  5seconds

    4. 检验环境: 外观检验应在不刺目的荧光灯下检查,其最低照度应在100尺烛光亮度以上,或者是

    60W日光灯,1.5m距离下检验。

         Test condition: Visual inspection should be conducted under anti-glare 

    fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp 

    of 1.5m distance.

    (三)接受标准 (Accept criteria)

    1.图像无花屏、彩屏、变色。(The image has no mess, color screen and 

    discoloration.)

    2.无白点、黑点、脏污、暗角。(There is no white spot, black spot, dirt or dark 

    angle in the image.)

    3.图像清晰,四周清晰度一至。(TThe image is same clear on all cornors)

    七、外观检验标准  (Visual inspection criteria)

    (一)外观表面定义:( The appearance of the definition)

    1.摄像头模组的外观  (Camera module appearance)

    (二)检验方法:( Test methods)

    1.人员: 外观检查人员需经过培训并且辨色能力正常,其视力应达到1.0以上(矫正后达到1.0

    以上亦可),辨色能力应可通过标准测试。

    Staff: The appearance of the inspectors to be trained and the capacity of normal color 

    vision, Its vision to achieve more than 1.0 (after correction can also be reached more 

    than 1.0), Color vision capability should be available through standard tests.

    2.距离和时间: 观察距离为50  75cm,观察时间为每个表面3  5秒。

    Distance and Time: Observation distance: 50  75cm, 

    Observation time for each surface: 3  5seconds

    3. 检验环境: 外观检验应在不刺目的荧光灯下检查,其最低照度应在100尺烛光亮度以上,或者是

    60W日光灯,1.5m距离下检验。

           Test condition: Visual inspection should be conducted under anti-glare 

    fluorescent lamp with min 100 feet candela luminace, or under 60 watt fluorescent lamp 

    of 1.5m distance.

    4.观察角度: 观察角度在40  50之间。

      Observation angle: Observation angle between 40  50.

    (三)接受标准 (Accept criteria)

    1.清洁程度:部件必须无污点、无尘、无油脂及无其它污迹。由于运输材料造成的污迹如果

    能够吹去或抹去则是可以接受的。

    The degree of Cleanliness : Components must not stain, clean, no grease and other 

    stains. Because of s s stains caused by the transport of materials can  erased , it 

    is acceptable.

    2.装配表面:需装配的零部件应避免有划痕、凿痕、凹痕、弯折、破裂、压痕、擦伤或其它

    因不当装配所引起的缺陷。

           Assembly surface: Assembly of parts and components required to have scratches 

    should be avoided, dent, bend, break down, Indentation, scratches or other improper 

    assembly defects.

    八、 可靠性测试 (Reliability Test)

    项目Items条件Condition规格Specification

    高温实验

    High Temperature Test温度(Temp):60℃

    时间(Time):96H无异常No abnormal

    低温实验

    Low Temperature Test温度(Temp):-20℃

    时间(Time):96H无异常No abnormal

    湿度实验

    Humidity Test温度(Temp):60℃

    湿度(Humidity):80-85%

    时间(Time):24H无异常No abnormal

    镜头座拉力实验

    Cable Tensile Strength Test荷重:4KG

    持续时间:60秒无异常No abnormal

    跌落测试(单体)

    Drop Test高(High):60CM

    回数:10次

    木板上电性能正常

    Electric normal

    跌落测试(整箱)

    Drop Test高(High):60CM

    一角三边六面

    木板上电性能正常

    Electric normal

    震动测试(单体)

    Vibration Test1.震动机的震动频率调至50Hz;

      Vibration machine vibration  frequency to 50Hz

    2.震动幅度Vibration amplitude  1.5MM;

    3.震动时间Vibration time 30 Minutes电性能正常

    Electric normal

    拔插实验

    USB connector回数:25回电性能正常

    Electric normal

    九.包装要求(Packing Request) 

    1、产品应严格根据产品特点制定相应的包装标准并遵照执行,以保证产品规定使用和储存期内,

    达到防静电、防湿、防震、防霉、防野蛮装卸等标志及相关保质要求。

    Products should be strictly in accordance with the characteristics of the development 

    of the corresponding Product packaging standards and in compliance with the 

    implementation, guarantee the use and storage of products during the period, reaching 

    anti-static, moisture, shock-proof, mildew, anti-barbaric handling related signs and 

    shelf-life requirements.

    2、产品外包装上应标明:供方名称/标志、产品型号规格、内装数量、生产日期/批号和定单号。

          Product packaging should be marked: Supply-side name / logo, Product Model 

    specifications, containing the number, production date / batch number and order 

    number.

    3、包装及装箱方案依据客户要求,由双方协商具体细节,以封样为准。

          Packaging and packing programs based on customer requirements, specific details 

    of consultations by both parties, to finished products as the standard.

    十.其它(Others)

    1.本承认书的更改需经双方确认,任何一方单独修改无效。

         The recognition of the need to change the book recognized by both parties, either 

    party to amend a separate as null and void.

    2.本承认书在客户收到的七个工作日内,必须签章返回,逾期视为默认。

        Admit in the book the customer received within seven working days, must return 

    signature, late regarded as the default. 

排队机厂家,人脸识别闸机设备品牌定制开发,钢制多媒体讲台批发价格,摄像头模组哪个牌子好
版权所有:深圳市轩好韵电子有限公司  电脑版  手机版